Windows cannot be installed to this disk the selected disk has an mbr partition table on efi system | Windows 10

Method 1 :

• Start the system and start the installation process.
• On the screen, which says install now, press SHIFT + F10 or SHIFT + fn +F10 (whichever works).
• You will see a command prompt window.
• Now follow this carefully.. (beware of case-sensitive commands)
• Type diskpart. Press Enter.
• Type list disk. Press Enter.
• Type select disk 0. Press Enter.
• Type clean. Press Enter.
• Type convert GPT. Press Enter.
• exit.

Hope the issue resolved now.

Method 2 :

  

Follow these steps if the hard disk volume size is less than 2.19 TB:

1. Temporarily disable the EFI Boot Sources setting in the BIOS:
2. Restart the computer, and then press F10 to enter the BIOS.
3. Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
4. Select File > Save Changes > Exit .
5. Install the Windows operating system.
6. Enable the EFI Boot Sources setting in the BIOS:
7. Restart the computer, and then press F10 to enter the BIOS.
8. Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
9. Select File > Save Changes > Exit .

Follow these steps if the hard disk volume size is greater than 2.19 TB:

Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition